1
please try again.
Your current location:
Homepage
/
/
The application of metal mirror processing technology in automobile half shaft.

The application of metal mirror processing technology in automobile half shaft.

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2020-07-01
  • Views:0

(Summary description)  Half shaft is an important part of automobile transmission system. It is used to transmit the power output from the differential half shaft gear to the driving wheel or wheel side reducer. According

The application of metal mirror processing technology in automobile half shaft.

(Summary description)  Half shaft is an important part of automobile transmission system. It is used to transmit the power output from the differential half shaft gear to the driving wheel or wheel side reducer. According

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2020-07-01
  • Views:0
Information

  Half shaft is an important part of automobile transmission system. It is used to transmit the power output from the differential half shaft gear to the driving wheel or wheel side reducer. According to the force condition of the inner and outer end of the half shaft, the drive axle with non independent suspension is generally divided into three types: full floating half shaft, three quarter floating half shaft and half floating half shaft.

  The inner end of the half shaft is connected with the half shaft gear by spline, and the half shaft gear only transmits the torque to the half shaft when it works. The half axle is the most torque bearing part among the axle parts of automobile. Therefore, it is easy to fracture in the process of use.

  In order to meet the strength requirements of the half shaft, Shandong juyineng Intelligent Technology Co., Ltd. has carried out targeted research and development, and improved the production process of the half shaft.

  In the turning and grinding process, due to the inconvenience of fixture adjustment, it is difficult to find the positive pole of the workpiece when changing the supply, which results in low precision of gear clamping and positioning and low production efficiency. Therefore, in view of the machining difficulties and application requirements of the half shaft, the metal surface crystal remodeling processing technology is developed.

  1. For the half shaft oil seal fitting and bearing fitting, turning instead of grinding is carried out, without repeated clamping. After turning, the tool is directly changed for inevitable sharp machining instead of grinding and polishing process. Greatly save customer time and improve production efficiency.

  2. Aiming at the problem that the half shaft is easy to fracture in the process of use. The fatigue life of the axle shaft can be obviously improved by using the sharp machining process to make the surface of the axle shaft deform locally and increase the compressive stress.

  3. In view of the harsh working environment of the half shaft, the sharp mirror processing technology greatly improves the fatigue strength and corrosion resistance of the half shaft, so that it can withstand high alternating load and prolong the service life.

  4. In the process of use, under the condition of high speed, the oil seal edge and shaft rub at high speed, the instantaneous temperature is very high, and it is easy to wear and aging. Certainly, sharp mirror processing technology can increase the surface hardness of the axle shaft by more than 20%, delay aging and improve performance.

Scan the QR code to read on your phone

Contact us

Add:Room 1409, 14 / F, Jianghai Yuanmeng Valley, 998 New Century Avenue, high tech Zone, Tongzhou District, Nantong City

Tel:86 - 513 - 86728800   /    86 - 17372888806   ( Mr. Pan )

QR code

JINYUN

wap

JINYUN

Message

Username used for comment:
客户留言
Description:
jinyun

Copyright © Nantong JinyunFluid Equipment Co., Ltd.       苏ICP备20032306号      Power:300.cn