1
There is currently no information to display
Please add data record on website background.
Your current location:
Homepage
/
/
Application of mirror machining technology in gearbox housing

Application of mirror machining technology in gearbox housing

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2020-07-01
  • Views:0

(Summary description)  Half shaft is an important part of automobile transmission system. It is used to transmit the power output from the differential half shaft gear to the driving wheel or wheel side reducer. According

Application of mirror machining technology in gearbox housing

(Summary description)  Half shaft is an important part of automobile transmission system. It is used to transmit the power output from the differential half shaft gear to the driving wheel or wheel side reducer. According

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2020-07-01
  • Views:0
Information

  Gearbox is a very important part of the vehicle, it can change the transmission ratio, expand the role of torque and speed of driving wheel. Next, Shandong Juyi Neng Intelligent Technology Co., Ltd. will give you a brief explanation on the related process of the gearbox.

  The gearbox is equipped with input shaft, output shaft, other transmission shafts and gears. The speed of vehicle can be changed by changing the transmission ratio of sliding gear and fixed gear installed on these shafts. Thus, the main function of the gearbox is to support the transmission shaft to ensure the center distance and parallelism between the shafts. The shape of gearbox shell is complex, and most of them are thin-walled. The workpiece has poor rigidity, easy deformation and is difficult to clamp. However, the machining accuracy is required to be high. In particular, the bearing hole of gearbox has high requirements for dimensional accuracy and roughness. At the same time, as the assembly contact plane, the bearing hole is easy to wear. The wear of the bearing hole in the gearbox will make the gear axis offset and the two axes are not parallel, and the normal meshing of the gear will be damaged. Therefore, the fatigue life and corrosion resistance of the bearing hole are also required.

  According to the processing requirements of gearbox shell, it is inevitable that the technology of crystal remodeling on the surface of sharp metal can fully meet the needs of customers. We have the following advantages:

  1. There is no need for repeated clamping, and the bearing hole can be machined directly after fine boring. Reduce working time and improve production efficiency.

  2. After one-time processing, the surface roughness of the workpiece has been significantly improved, and the workpiece has excellent assembly performance and service performance.

  3. The technology of crystal remodeling on the surface of sharp metal can improve the surface hardness and fatigue life of bearing hole, and greatly improve the service life of parts.

Scan the QR code to read on your phone

Contact us

Add:Room 1409, 14 / F, Jianghai Yuanmeng Valley, 998 New Century Avenue, high tech Zone, Tongzhou District, Nantong City

Tel:86 - 513 - 86728800   /    86 - 17372888806   ( Mr. Pan )

QR code

JINYUN

wap

JINYUN

Message

Username used for comment:
客户留言
Description:
jinyun

Copyright © Nantong JinyunFluid Equipment Co., Ltd.       苏ICP备20032306号      Power:300.cn